IPC IRWIN PowerBase S5

This heavy-duty power supply offers AC and DC (smoothed) output voltages, both outputs are selected by a single rotary switch and may be used simultaneously up to a combined output current of 5 Amps. In addition, the power supply incorporates both a safety cut-out in case of an overload, and a unique ‘Voltage Locking System’ which allows the output voltage (AC & DC) to be limited to either a max. or min. voltage, or a range of voltages or at one single voltage level. 

DESCRIPTION. 

The Powerbase S5 PSU offers 3, 6, 8, 11, 13 & 15VAC and 3, 7, 10, 13, 17, & 20VDC, to a maximum current of 5 Amps, the DC output is a fully rectified, smoothed (via a 4,700uF capacitor) voltage. Both outputs are unregulated which means the output voltage will vary in relation to the amount of current being drawn, for a precise voltage a voltmeter should be used. The front panel incorporates an illuminated on/off rocker mains switch, five 4mm output sockets for AC, DC and earth and a safety cut-out reset button. The Powerbase S5 PSU, as mentioned above, also incorporates a unique ‘Voltage Locking System’, this consists of 5 Allen key screw heads surrounding the voltage rotary switch, which are screwed out to prevent the dial from rotating.

SPECIFICATIONS.

Electrical Supply = 220-240VAC, 50-60Hz 
Dimensions = 285 x 185 x 175mm overall.
Mass = 2.6kg
AC Voltage Range = 3, 6, 8, 11, 13 & 15V (non-regulated).
DC Voltage Range = 3, 7, 10, 13, 17 & 20V (full-wave rectified/smoothed, non-regulated).
Output Current = 5 Amps Maximum (AC or DC or Combined).
Supplied with Allen key to lock the VLS
Manufactured in the UK