Signal Generator & Amplifier
Provides sine, square or triangular waveforms (IPC-4885-W). Frequency selection is by a switched range and continuously variable fine adjustment control. The frequency is displayed on an LED display. All connections are via pairs of labelled 4mm sockets with one of each pair connected to earth.
An illuminated on/off switch is mounted on the rear panel adjacent to a fused IEC mains inlet. Enclosed in a robust metal case with a durable powder coated finish.
Description: Signal Generator & Amplifier
Part Number: IPC-4885-W
Electrical Supply: 220-240VAC, 50-60Hz
Dimensions: 255 x 220 x 110mm overall
Sig. Gen. Mode > :
Waveforms: Sine, Square & Triangular, sinewave distortion 1% on all ranges, square wave rise time 1µs approx.
Frequency Range: 0.1Hz to 100kHz in six ranges, accuracy ±5% on all ranges
Voltage Output: 0 to 10V (peak to peak), continuously variable across all ranges & waveforms
4Ω Output: Power output of 4W over entire frequency & waveforms, will drive loudspeaker or other suitable devices
600Ω Output: Provides attenuation settings: x 1, x 0.1 & x 0.01, all ±5%
Amplifier Mode > :
Performance: Voltage gain 0 to 100, Input impedance 1MΩ, Max. input 200mV (pk to pk), Output spec. same as above
Frequency Response: Frequency response 1Hz to 100kHz (-3dB bandwidth)